The do’s and don’ts of DIY Combi-Boiler Repairs

Combi boilers provide heat and warm water for your house without the requirement of a hot water tank, they are a hassle-free method of heating your house and are ideal for smaller sized residential or commercial properties and flats where a large water tank is not a practical or practical alternative. Regardless of their increasing popularity (now over 50% of homes in the UK operate a combi boiler rather than a warm water tank) many people believe that combi boilers are undependable or unsuitable for bigger properties, nevertheless this is frequently not the case.

Combi boilers are more efficient and practical than the water tank, nevertheless they are typically more complex and therefore vulnerable to issues, often though, these problems are not serious and easily solved. If you are presently experiencing problem with your boiler, there are typically a couple of choose reasons and all with easy services. First of all, it is necessary to keep in mind that combi boilers are connected to the gas supply, so any efforts of DIY are often not suggested and can be very unsafe.

There may be small issues with your combi boiler that can be fixed rather easily and quite securely yourself without having to get in touch with an engineer, the secret is to understand what are these particular problems.

If your heating or warm water is not working, before calling out a signed up boiler technician (check if someone is registered here), it is worth inspecting a couple of things initially. Initially, constantly inspect the pressure on the boiler as this can often be a cause of misbehaving main heating. The basic operating temperate for a boiler is between the 1 and 1.5 bar, is the level falls under this, you may need to fill up or tighten it. If the level is much higher than this you may have to release some of the pressure. Make sure to constantly read your boiler manual carefully before rebooting or refilling your boiler and ensure that you understand and can monitor the warning lights to identify any issues.

Alternatively, there may be an issue with your pilot burner. These lights can go out for many factors and a number of them are not serious sufficient to justify calling a boiler specialist. These lights can often be quickly and safely be relight yourself, again carefully check out the manual and ensure you understand the process beforehand. Instructions to do this are typically on the back of the boiler door.

If there is a problem with your heating or hot water it might not be an issue with your boiler at all. Boilers are linked to the gas supply, so it may be that the problem lies here. Examine throughout your house to see if other gas products are working, such as fires or cookers, to see if your supply is working properly. If not, then you must contact your gas provider.

If none of the above get your combi boiler back into action, then get in touch with a signed up engineer. Note that you need to never attempt to fix a boiler yourself.

Post Sponsored by East Ham Roofing – Your Local Roofers in East Ham.

Making Sure Your Central Heating Is Working Well

With winter season simply around the corner, it’s time to look into your central heating unit. Making certain your heating is running efficiently and safely is better done early– wait too long and prior to you understand it, you’ll be freezing inside your home on a cold morning and the heating engineers are all reserved up!

By checking your heating system early, you’ll prevent any cold mornings, headaches, and high repair work expenses. To keep your house great and warm, make certain to follow these steps:-

Examine your radiators for cold spots

Switch on your heating, let the system run for a couple of minutes, and inspect all your radiators. Are all of them entirely warm or exist cold patches? Cold areas indicate an accumulation of air bubbles, scale, or sludge in the radiator pipelines.

If the radiator is cold at the top, you’ll need to bleed the radiator by releasing the trapped air. If the middle or bottom is cold, you’ll require to clean out the accumulated scale or sludge. This requires an extensive cleaning after removing the radiator or a flush of the system.

Examine the pilot light

If possible, look at the pilot burner when you fire up your boiler. Is it a blue flame? This means that the fuel is burning cleanly and effectively. If the pilot light is orange or yellow, the flame is cooler and indicates that insufficient combustion is taking place. This might cause soot build-up, smoke damage, and the release of carbon monoxide. In this case, you’ll require to call a heating professional for servicing.

Avoid frozen pipelines

When the temperatures drop substantially listed below 0 degrees for extended periods of time, one problem is the risk of your pipelines freezing. To prevent this, lag your pipelines, which implies including insulation Ready-made lagging is readily available for purchase and is fitted directly to your pipes. Not just will it help secure versus freezing, it likewise keeps the warm water hot and prevents condensation. Lagging your pipelines guarantees you take pleasure in hot water and space heating throughout your home.

Maximise your insulation.

Staying on the topic of insulation, it’s also time to insulate the rest of your home! Or at least make sure whatever is properly sealed. This is because even though your heating could be running without any problems, all of this would be for nothing if your home is leaking that warm air easily.

Examine that your windows remain in outstanding condition, and any gaps are sealed off. Draught-proofing strips are cheap and easy to set up for windows, doors, and loft hatches. Your fireplace is likewise a big culprit when it comes to draughts– a chimney draught excluder should repair that. Put filler in fractures in your walls or floorboards; use a filler that can broaden, agreement, and move with the floorboards.

Regular maintenance

You ought to have your boiler and heating unit serviced once a year by a certified engineer. This is to make sure that whatever is working correctly and to prevent any problems, both huge and little. With a regular service, your heating engineer will check all parts and repair any concerns, offering the level of expertise that’s needed when handling something as complex as your central heating.

Winter is typically when heating companies and professionals are at their busiest. That’s why it’s so essential to schedule a maintenance as early as possible, if you have refrained from doing so already. Beat the rush and you’ll ensure to avoid the inconvenience of finding an engineer if you come across a boiler or a heating breakdown!

Look for ways to increase efficiency

In some situations, you might be aiming to enhance the effectiveness of your heating a lot more after completing maintenance. There are a number of small things you can do that, altogether, will increase the efficiency of your heating considerably.

Install a magnetic filter inside your heating unit to keep rust and sludge build-up to a minimum. Place radiator reflector sheets behind the units to guarantee that the heat is not lost through the wall. Time your heating to match your schedule– have heating and hot water ready when you get up or get back, and lower the temperature level while you are away.

You may even desire to upgrade to a more effective model. Modern boilers reach effectiveness scores greater than 90%, saving you more money. You may even get some assist with government grants that are pushing for more eco-friendly heater!

Post Sponsored by Walthamstow Roofing – Contact Us For All Your Flat Roof Repairs.